New concept of light body of a mixer: Stetter Ultra Eco
Since the beginning of 2014 Europe has emission standard EURO 6 for trucks and busses. In order to meet the tightened limit values of the new emission standard for nitric oxides and soot particles, additional components in the exhaust cleaning system of the vehicles are required beside additional modifications. This results in an increase of the vehicle’s weight by up to 300 kg. Higher vehicle weight means less payload. And less payload means less turnover for your fleet.
In order not to lose turnover for more environmental protection, our engineers have developed a completely new weight-optimized truck mixer body: UltraEco. Transport of 8 m³ concrete is possible with the UltraEco truck mixer body in combination with an also weight-optimized EURO6 8×4 vehicle. Thus only emissions are reduced, not the sales volume.
The weight of the UltraEco basic version totals to not more than 3,250 kg. 8 m³ concrete (with 2.35 t/m³) can be transported economically when mounted onto a weight-optimized 8×4 vehicle. No need to miss anything. Above all not the usual high robustness and long lifetime of a Stetter Truck Mixer.
For instance the comfortable and easy-to-operate control system SMART-CONTROL (Option).
It makes for reduction of wear reducing the fuel consumption at the same time.
|Mixer Type||AM 9/8 — UltraEco|
|Nominal volume m3||9 m3|
|Geom. drum volume l||15.000 l|
|Water line l||10.100 l|
|Fill ratio %||60 %|
|Drum inclination deg.||12,45°|
|Drum speed rpm||0 — 12/14 ot. /min|
|Weight of mixer*||3.250 kg|
|Drum diameter mm||2.300 mm|
|Height of feed hopper **mm||2.546 mm|
|Clearance height **mm||2.546 mm|
* Weight indications completely mounted/ready for operation acc. to DIN 70020,
deviation+/- 5 %
Truck Mixer Gearbox CML ZF Ecomix II
Truck mixer drum made of hardened high-strenght wear-resistant steel
Control system Stetter SMART-Control (Option)
Drum speed control follows the diesel engine rev